LibraryArts & CraftsMusical InstrumentsPart 7: The Craft: Acoustics, Making, Care and Tuning

INS-27

Making instruments: luthiery and materials

2 min read

Overview

On this page: Materials, Making by family.

  • Woods: spruce (soundboards: light and stiff), maple (violin backs), rosewood and ebony (fingerboards, backs), mahogany, cedar; Indian tun (red cedar, sitars and sarangis), teak (sarods), jackfruit (veena, mridangam), sheesham (tabla, khartal), bamboo (flutes); pernambuco (the best bows, now endangered).
  • Gourds and shells: the tumba gourds of sitars and tanpuras grown around Pandharpur (Maharashtra), coconut shells (ravanhatha, pena), calabash (kora, balafon).
  • Skins and gut: goat, sheep, buffalo and cow skins for drums; gut strings (sheep intestine) for old violins and sarangis; ethical and caste questions attach to skin work (INS-23.6).
  • Metals: brass, bronze and bell metal (kansa, about 78 per cent copper and 22 per cent tin in many Indian traditions), steel strings, silver flutes, cymbal alloys (B20 bronze).
  • Synthetics: nylon (guitar strings since the 1940s, Albert Augustine with Segovia), plastic drumheads (Remo, 1957), carbon fibre (cellos and bows), 3D-printed instruments.

  • Bowed and plucked strings: carving the top and back, bending the sides, setting the neck, varnish (the "Stradivari varnish" myth); the sitar's gourd joined to a tun neck, frets tied with gut, the jawari shaped by hand (INS-00.05).
  • Drums: shell turning or carving, skin preparation, lacing (baddhi), the multiple-layer syahi of the tabla applied in many thin coats and polished with a stone.
  • Wind: bamboo selection and heat-drilling of bansuri holes; reed making for oboe, shehnai (from palm leaf or pala grass) and nadaswaram (from naanal reed); brass bending and valve fitting.
  • Clay and metal idiophones: the ghatam's clay mixed with metal filings and fired; gongs hammered and tuned; bells cast by the lost-wax or sand method.
  • Craft clusters and GI tags: Cremona, Mirecourt, Mittenwald (violins); Paracho (guitars); Miraj (sitar, tanpura), Thanjavur and Bobbili (veena), Manamadurai (ghatam), Pilibhit (bansuri), Kolkata and Varanasi (sitar, tabla).

Summary

  • Materials: spruce (soundboards: light and stiff), maple (violin backs), rosewood and ebony (fingerboards, backs), mahogany, cedar
  • Making by family: carving the top and back, bending the sides, setting the neck, varnish (the "Stradivari varnish" myth)
  • Woods: spruce (soundboards: light and stiff), maple (violin backs), rosewood and ebony (fingerboards, backs),…
  • Gourds and shells: the tumba gourds of sitars and tanpuras grown around Pandharpur (Maharashtra), coconut shells (ravanhatha,…
  • Skins and gut: goat, sheep, buffalo and cow skins for drums
  • Metals: brass, bronze and bell metal (kansa, about 78 per cent copper and 22 per cent tin in many Indian traditions),…
  • and 1 more on this page.
This section0 of 12 ticked
Tick a box when you have learned or tried something. Saved only on this device.

Tip: the ← and → keys also turn the pages.

Musical Instruments