LibraryArts & CraftsSewingPart 2: Sewing Machines

SEW-03

Parts, care and troubleshooting

1 min read

Overview

On this page: Main parts, Presser feet, Care, Troubleshooting.

  • SEW-03.1 Main parts: spool pin, thread guides, tension discs, take-up lever, needle bar and clamp, presser foot and lifter, feed dogs, throat (needle) plate, bobbin, bobbin case and hook, hand wheel, stitch length and width controls, reverse lever.
  • SEW-03.2 Presser feet: all-purpose, zipper foot, buttonhole foot, blind-hem foot, walking (even-feed) foot, rolled-hem foot, piping foot.
  • SEW-03.3 Care: brush out lint after each project; oil where the manual says (old machines need more); change the needle every 8 or so hours of sewing; cover the machine against dust.
  • SEW-03.4 Troubleshooting: thread nests underneath → rethread the top with the foot up; skipped stitches → new or right-type needle; puckering → shorter stitch or less tension; needle breaking → bent needle or pulling the cloth; loops on top → bobbin tension or wrong bobbin.

Summary

  • Main parts: spool pin, thread guides, tension discs, take-up lever, needle bar and clamp, presser foot and lifter, feed…
  • Presser feet: all-purpose, zipper foot, buttonhole foot, blind-hem foot, walking (even-feed) foot, rolled-hem foot, piping…
  • Care: brush out lint after each project
  • Troubleshooting: thread nests underneath → rethread the top with the foot up
This section0 of 4 ticked
Tick a box when you have learned or tried something. Saved only on this device.

Tip: the ← and → keys also turn the pages.

Sewing