LibraryArts & CraftsSewingPart 0: Start here: five short questions
SEW-00.03How does a sewing machine tie a knot with two threads?
Short answer: The machine needle has its eye near the point. It pushes the top thread down through the cloth and makes a small loop underneath. A rotating hook (or a shuttle in old machines) catches that loop and passes it round the bobbin, which holds the second thread. The take-up lever then pulls the loop tight, so the two threads lock together inside the fabric. This is the lockstitch.
The parts that work together
- Needle: eye at the point, a groove for the thread, a flat side so it sits the right way.
- Hook and bobbin: the hook grabs the loop; the bobbin feeds the lower thread.
- Take-up lever: moves up and down to pull the stitch tight and draw new thread.
- Feed dogs: small teeth under the presser foot that move the cloth forward one stitch at a time.
- Tension discs: balance the two threads so the "knot" sits in the middle of the cloth, not on top or below.
- Chain stitch, the other way: the first machines and today's sacks and overlockers use loops of thread linked like a crochet chain, which can unravel if pulled from one end.
Remember this: A hand needle goes all the way through; a machine needle never does. The machine's genius is the needle with an eye at its point and the hook that catches its loop.
Tip: the ← and → keys also turn the pages.
